Skip to content
Bathroom renovation

Shower tray replacement across Cardiff and South Wales

A cracked tray, failed waterproofing, or just tired and stained? Cardiff Plumbing Limited removes the old tray safely, prepares the floor properly and fits a new one so water stays in the tray and your bathroom stays dry underneath.

  • Floor prepared and waterproofed properly
  • No leaks into the room below
  • Tidy finish, old tray removed
When to replace

Five signs your shower tray needs replacing

A cracked or leaking tray is not just an eyesore—it lets water seep into the joists and subfloor, causing rot and damp that spreads into the walls. These are the ones we fix most often.

A visible crack or chip

Even a hairline crack lets water through. The floor below stays damp and eventually rots. Repair products only seal the surface; they don't stop water finding its way in.

Water pooling inside the tray

If water sits in puddles instead of flowing to the drain, the tray has sagged or the floor underneath has shifted. The water won't drain properly and will soak into the fabric below.

Stains or discoloration that won't clean

Brown or black stains on the underside or at the edges usually mean water is leaking through and damp is building up underneath.

Mould around the edges or underneath

If mould keeps coming back despite cleaning, the tray or the floor seal is letting moisture in. Poor ventilation helps, but a leaking tray is usually the root cause.

Damp ceiling or walls in the room below

Water from a leaking tray soaks down into the joists and can appear as damp or even wet patches in the floor, walls or ceiling below. By then the damage is well under way.

Acrylic, stone resin or ceramic?

Not all trays are made the same. Cheaper acrylic cracks easily and yellows over time. Stone resin and ceramic are tougher, feel more solid and last longer, but they cost more upfront and need careful handling during fitting.

Tray types and materials

Choosing the right tray for your space

The tray must fit your existing enclosure or the space you're building, and the material needs to suit how the room is used and maintained.

Acrylic
Lightweight and cheap. Easy to fit, warm to touch. Cracks under impact, stains and discolours with age. Best for guest bathrooms or tight budgets.
Stone resin
Composite of real stone aggregate and resin. Durable, doesn't discolour, hides dirt well in grey or dark finishes. Heavier to handle. Good balance of cost and longevity.
Ceramic or porcelain
Hardwearing and beautiful but brittle. Prone to chips and cracks if heavy objects are dropped. Needs careful installation. Premium look, premium price.
Walk-in tray or curbless
No lip, flush with the floor. Modern and accessible, but needs careful waterproofing and grading so water flows to the drain reliably.
Corner or offset trays
Fit tight spaces. Limited choice of finishes and sizes. Check dimensions carefully before ordering.

Most trays are 760–900mm wide and 700–1200mm long. Choose white or off-white if you want classic and easy to clean; grey and dark finishes hide soap scum but show watermarks.

Get the size right before we start

Measure the width and length of your existing tray (or the space if you're starting fresh) and check the drain position. Order the new tray before we book the job, so we have it on the day and there are no surprises about fit.

What's included

Everything that goes into a proper tray fit

  • Checking the existing floor, joists and drain before we start
  • Turning off the water and removing the old tray safely
  • Cleaning and levelling the floor
  • Installing a waterproof membrane if the floor is weak or damaged
  • Fitting the new tray on a solid, level bed of mortar or flexible adhesive
  • Connecting the trap and waste pipe securely
  • Testing the drain for leaks and flow
  • Sealing around the tray edge with silicone or mortar
  • Clearing up and removing the old tray

We don't grout or tile around the tray unless you've asked for it—that's usually a separate job. We'll prepare the edge cleanly so a tiler can work neatly if you want one later.

How the job works

From broken tray to watertight shower

  1. We survey and advise

    We look at the old tray, the floor beneath it and how the drain and pipes run. We tell you what the floor needs and what tray will fit.

  2. You choose and order

    Pick your tray, size and colour. We confirm it's the right fit and book a date for the removal and installation.

  3. We remove and prepare

    Out with the old tray, damaged floor cleaned away, and the base levelled and waterproofed where needed.

  4. We bed and seal the new tray

    The new tray goes on a solid, level foundation. We test the drain immediately and seal the edges so no water escapes.

  5. We hand it over clean

    Water's on, everything works, and your bathroom is ready to use. Old tray and rubbish taken away.

Building regulations and standards

Shower trays must comply with UK regs

The Building Regulations Part M requires bathrooms to be accessible and safe. Shower trays are covered by BS 6465 (design of bathrooms) and must be level, stable and properly sealed so water doesn't escape into the structure.

The floor underneath must be sound and free from moisture before a new tray is fitted. If there's existing damp or rot, that has to be fixed first or the new tray will fail in the same way.

All waste pipes must be trapped and vented properly. The trap prevents sewer gas coming back up, and the vent (usually through the roof) lets air into the system so water flows freely.

What affects the cost

Why shower tray jobs vary in price

  • The tray itselfAcrylic is cheapest; stone resin is mid-range; ceramic is premium. Size and shape affect cost too.
  • Floor conditionA solid, level floor takes half the time. Rotten wood, uneven joists or existing damp adds work and materials.
  • WaterproofingA new membrane costs more than spreading mortar on a good floor, but saves rot later.
  • Drain and pipesIf the trap is ancient or the pipes corroded, they need replacing too.
  • Enclosure workIf we're fitting a new tray into old walls, they may need adjusting or resealing.
  • Finish workGrouting, tiling or decorating around the tray adds to the job and extends the timescale.
After fitting

Keeping your new shower tray in good order

Don't step on the edges

Tray edges are not load-bearing. Step in the middle or at the corners, so you don't crack or flex the edge seal.

Wipe down after showers

Water left standing leaves marks and helps mould grow. A quick wipe with a dry cloth keeps it looking new.

Use a non-abrasive cleaner

Bleach, scouring pads and harsh chemicals damage the finish. Mild soapy water or a bathroom cleaner suited to your tray material is all you need.

Check the seal now and then

If the silicone around the edge starts to crack or mould grows persistently, it's time to reseal. That's a quick job and stops water getting in.

Ventilate the bathroom

An extractor fan or open window after a shower stops condensation and mould. Twenty minutes is usually enough.

Report leaks straight away

If you spot water under the tray or the floor feels soft nearby, call us. Early action stops structural damage.

Questions answered

Shower tray replacement questions, answered

How long does a shower tray replacement take?

Usually half a day to a full day, depending on how much work the floor needs. If the floor is sound and level, it's quick—out with the old, in with the new, test and seal. If the floor is rotten or uneven, preparing it takes longer. We'll tell you what we find before we start work and confirm how long it's likely to take.

Can you fit a new tray into my old enclosure?

Often yes, if the new tray is the same size or slightly smaller. If you're upgrading to a bigger or differently shaped tray, the enclosure may need adjusting. We measure everything before you order the tray, so you don't end up with something that doesn't fit.

What if the floor under my shower is damaged?

We'll clean away the damaged wood and repair it properly before fitting the new tray. If there's rot, we may need to replace joists or treat the floor with a preservative. That adds cost and time, but it stops the new tray failing in the same way. Some bathrooms need a waterproof membrane laid down—we'll advise once we see what we're dealing with.

Do I need to be at home during the job?

It helps if you're here, so we can ask questions about how you use the shower and what finish you'd prefer. We'll text before we arrive and let you know if anything unexpected comes up. If you can't be there, that's fine—just make sure we can get to the bathroom and lock up after.

Can you install the tray and do the tiling too?

We fit the tray and prepare the edges neatly. If you want grouting, tiling or decorating around it, that's usually a separate job for a tiler or decorator. We'll leave it clean and ready, so they can get started straight away. If you want both jobs done together, we can arrange it.

What warranty do you offer on a new shower tray?

The tray itself comes with the manufacturer's warranty—usually 5 to 10 years depending on the material. Our workmanship is guaranteed: if the seal fails or the tray leaks because we fitted it wrong, we'll come back and fix it. It's worth reading the tray warranty too, as some don't cover impact damage or abrasive cleaning.

Ready for a new shower tray?

A qualified plumber will inspect your bathroom, talk through your options and give you a clear price before we start any work.

03300437479