Skip to content
Mixers, pillar taps and spouts

Tap replacement and repairs in South Wales

A dripping kitchen mixer, a seized basin tap or a bath spout that sprays everywhere. We repair or replace taps across South Wales, and Cardiff Plumbing Limited always gives you a straight price before the work starts.

Taps we fit and fix
  • Kitchen pillar and mixer taps
  • Bathroom basin and monobloc taps
  • Bath and shower wall taps
  • Utility and outdoor taps

Leaking cartridges, worn washers, corroded connectors and isolation valves that won't budge — fixed in one visit wherever we can.

Why it happens

Why taps fail across South Wales homes

Rural and semi-rural properties

Homes in the valleys and on the edges of towns often have older pipework, longer runs to the mains, and water that carries minerals. Taps see hard wear from gritty supply, and isolation valves buried in older systems can be nearly impossible to find.

Victorian terraces and older semis

Stone cottages and terraced streets across the Valleys have solid pipework but old tap bodies and seized components under sink and basin. We carefully free what can be saved and replace what has corroded past repair.

Rental properties and holiday lets

Taps in short-term lettings across popular valleys and seaside areas take a hammering. We fix dripping and stuck taps fast and work directly with letting agents and landlords across South Wales.

Make or mend

How we decide whether to repair a tap or fit a new one

We repair when

  • The tap body is sound and the spout only drips, usually a worn washer or cartridge.
  • A handle is stiff, gritty or won't close fully, but the tap itself is not damaged.
  • Water weeps from the spindle or base and replacement seals are still made for that tap.
  • You prefer to keep it and spare parts are available at reasonable cost.

We replace when

  • The body is corroded, pitted, flaking chrome or clogged with mineral deposits.
  • The tap rocks on the sink or the plinth is loose and won't tighten.
  • It has been repaired before and is leaking again from the same fault.
  • The maker has stopped supplying parts or the cost of parts is half the price of a new tap.

Unsure which way makes sense? We assess it on the day, explain the options plainly and give you one firm price before we begin.

The visit

How a tap repair or replacement runs in South Wales

  1. Get to the tap

    We locate the water isolation valve, usually under the sink or on the wall behind the tap. If there is none, or it won't turn, we work from the main stopcock and explain what that means for the job.

  2. Shut off and assess

    We isolate the water, then examine whether it is the cartridge, seals or the entire tap that needs to go. We show you what we find.

  3. Repair or fit new

    If repairing, we replace worn parts and test for leaks under the sink. If replacing, the new tap goes on with fresh flexible connectors, correctly angled and sealed.

  4. Test and check

    Both hot and cold run, water flows as it should, nothing drips under the sink, and the tap isolates cleanly. We wipe down and clear away old parts.

What sets the price

Factors that affect tap costs across South Wales

  • The tap type and finishA simple pillar is quicker than a wall-mounted or bridge mixer, which need pipework repositioning and careful height setting.
  • Access and spaceNarrow cupboards under old sinks, pipes running through stone walls, and tight angles slow the work and may need extra fittings.
  • The isolation valveIf there is none, or it's seized from years of non-use, fitting a new one adds time but saves trouble on the next repair.
  • Water hardness and mineral build-upHard water areas across South Wales mean tap heads and aerators clog with limescale. We clean or replace them as part of the job.
  • Distance and call-out timeRural properties and properties on the edge of South Wales coverage may incur travel time; we always mention that upfront.
Our reach

South Wales areas we cover for tap work

  • Newport
  • Caerphilly
  • Pontypool
  • Cwmbran
  • Bridgend
  • Llantrisant
  • Rhondda Valley
  • Merthyr Tydfil
  • Neath Port Talbot
  • Swansea
Questions

Tap queries from South Wales homeowners

How quickly can Cardiff Plumbing Limited visit for a dripping tap?

We aim to visit within a few days of your call across South Wales. For burst pipes or water spraying into cupboards, tell us when you ring and we'll prioritise it. Emergency call-outs depend on our current schedule.

Will a new tap fit the holes in my sink or basin?

Not always — older sinks and basins have different hole sizes and spacing. We ask about your setup when you call, check the tap hole count and size before ordering anything, and can drill new holes if needed. This is why we confirm the detail before the visit.

What if I have no water isolation valve under my tap?

We fit one while we're there. It costs a bit more but it means the next plumber can isolate the water at the tap itself, which saves time and mess on future jobs. Many older South Wales homes don't have them, so it is a common fix.

Can you repair my old bath tap or do I have to replace it?

If the body is sound and parts are available, we repair it. We check cartridges, seals and connectors first. If the body is pitted or corroded, or if spare parts no longer exist for that make, replacement is usually the simpler answer. We tell you which on the day.

My kitchen tap leaks from under the sink, not the spout. What could that be?

The tap connectors are often the culprit — the rubber seals inside wear or the brass fittings corrode. Sometimes the base seal of the tap itself weeps. We trace it under the sink, tighten or replace the connectors and seals, and test for leaks before we finish.

Do you work in rural areas of South Wales?

Yes, we cover the Rhondda Valley, Merthyr Tydfil, Neath Port Talbot, Pontypool and beyond. For properties on the outer edges of South Wales, travel time may be added to your quote, but we always mention that upfront.

Leaking, stuck or dripping tap?

Call Cardiff Plumbing Limited and describe what is happening

We'll diagnose it over the phone, tell you what we think the fault is and give you a clear price to fix it.

03300437479